The Multiledges are currently being manufactured. The lead time on your delivery is approximate but will be in time for the spring 2025 climbing season.
Description
The Multiledge is a high-pressure inflatable portaledge designed to be the best possible balance between lightness, rigidity, and durability. The Multiledge may be used as a standard sleeping portaledge, a portable belay ledge, a car camping mattress or deluxe backpacking sleeping pad. The Multiledge provides a more rigid platform than a traditional aluminum-frame fabric-spanned portaledge when the Multiledge is pumped to the intended operating pressure between 6-12 psi, ideal for belay stances. Compared to framed portaledges, the Multiledge also achieves greater insulation, reduced weight, and allows you to forgo your old sleeping pad (saving even more weight). When used for sleeping on the ground or on the wall, the pressure can be slowly released until the user finds their optimal comfort level.
The Multiledge is made from thermoplastic polyurethane (TPU) which is the lightest, most abrasion resistant, UV resistant, and most expensive material available for the construction of drop-stitch products like SUPs and other drop-stitch inflatables. It's also more environmentally friendly than PVC because it uses less chemicals to make and is recyclable.
We’ve engineered the Multiledge for maximum durability without being too heavy, considering contact points with the rock wall and other areas likely to see the most stress. We have tested the Multiledge extensively and are confident you will be happy with your purchase.
Warranty:
We stand behind the quality, dependability, and practicality of the Multiledge, so please drop us a line through the website if your ledge does not perform as expected. We will make it right if there was a problem. If you puncture your Multiledge for any reason, we will send you a repair kit to permanently weld on a TPU patch.
What's included in this order:
- A suspension system made by USA company Skot's Wall Gear
- Inflation pump made by USA company K-pump
- Detailed manual for use
- All fittings needed for proper inflation
- Field repair patches.
Technical Details (Note, each Multiledge varies slightly from the listed specifications)
Length: 76 inches
Width: 26 inches
Thickness: 4 inches
Weight: 5.54 lbs ledge only, 0.96 lbs straps, 1.1 lbs pump, 7.6 lbs total.
Capacity: we recommend limiting use to below 1000 lbs or 4 climbers per ledge. We do not know the average break strength, but in one test, observed over 2000 lbs without failure.
